Armor All Garage Floor Mats & Cargo Liners

Terms & Conditions


All Armor All® Mats feature patented Drymate® technology that is absorbent, yet waterproof. Soft, stain-resistant fabric is coated on one side with a durable, special bonded backing that stops spills from soaking through from above or below. All mats are highly absorbent and hold up to 5 times their weight in liquids.



INSTALLATION INSTRUCTIONS: Thoroughly sweep and clean garage floor. Make sure floor is completely dry prior to installation. Smooth out wrinkles as you unroll and lay the mat flat. Once the product is laid flat, fold lines and wrinkles will eventually relax and disappear.

CAUTION: SECURE FRONT OF MAT DOWN WITH CARPET TAPE TO PREVENT MAT FROM STICKING TO TACKY TIRES AND WRAPPING AROUND TIRES. In extreme freezing and thawing conditions, it is possible for a vehicle’s tires to freeze to a wet mat. If such conditions occur, back up one foot and check mat to ensure it is not stuck to the tires to prevent mat from wrapping around the tire’s axle. Pull mat free before continuing to drive on the mat.

Excess Water: If mat becomes saturated from melting snow or rain, it is recommended that you squeegee excess water off the mat to speed up the drying process. Any floor surface may become slippery when moisture or mud, etc. is present. A wet/dry vac can be useful for keeping mat dry and clean. Polyester fabric dries quickly. Always wipe up any oil, anti-freeze, chemicals or other spilled fluids that may leak or drip from a vehicle. Leaving chemicals on product for extended time may cause damage to mat and floor.

For large mats, we recommend using a power washer or hose to clean. Squeegee mat to remove excess water. Allow mat to dry thoroughly before placing back in garage. Hang mat if possible to dry faster. Any laundry soap or dish soap will work on most stains or heavy soiling. Never use harsh chemicals or bleach on mat as waterproof PVC backing may be harmed.
WARNING: If floor has been treated with certain sealers or paints (i.e., epoxy) prior to mat installation, chemicals in the sealer or paint may react to Armor All® Garage Flooring Mat’s PVC backing causing it to adhere to the garage floor, which may result in damage to the mat and/or floor. Please check under the mat immediately after installation and periodically thereafter to ensure the mat and floor are compatible. See your sealer, epoxy or paint Manufacturer’s instructions for information on any possible reactions to PVC or other similar materials prior to installation. If no reaction is indicated by the manufacturer, wait 72 hours after floor treatment before installing any Armor All® Garage Flooring and check under mat periodically as indicated above.


Use fabric side up for most situations, especially for absorbency protection. It will trap spills to keep them from running onto your other cargo. Use waterproof side up when hauling messy cargo where absorbency is not a problem, i.e., hauling bricks, dry goods, cement bags, lawn and garden items, etc. You can then easily brush or shake off any material spilled while hauling.
Armor All® Cargo & Trunk Liners are machine washable. For best results, machine wash separately and hang dry. DO NOT BLEACH, as this will damage the waterproof backing.
For use as a seat cover, simply drape over your seats for protection. For a custom fit, use sharp scissors to cut liner to fit. Material will not fray or unravel. To hold seat cover securely in place, cut slit just wide enough to go over headrest. Slits should be at least 5” from fabric edge to avoid tearing.


All orders will be shipped via UPS Ground. Customers must provide a physical address; UPS does not deliver to PO boxes.


All product returns must occur within 60 days of receipt. Customer is responsible for the return shipping and packaging of product.


RPM, Inc. warrants to the original purchaser only that the Armor All® Garage Floor Mat manufactured by RPM, Inc. will be free from defects in material and workmanship under normal use and service for a period of 60 days from the date of purchase. THIS WARRANTY SHALL NOT APPLY AND NO WARRANTY OF ANY KIND SHALL EXIST IF THIS PRODUCT HAS BEEN SUBJECT TO ABUSE, MISUSE, NEGLECT OR ALTERATION OF ANY TYPE OR CAUSE. In addition, RPM is not responsible for defects resulting from improper use, or from uses beyond design capability. In addition to the foregoing limitations, RPM’s limited warranty shall not cover surface stains, including stains resulting from battery acid, gasoline spills, other caustic materials, asphalt, driveway sealer and rubber wheels, defects resulting from improper maintenance or installation, damage from improper usage including, without limitation, burns, cuts, tears, scratches, scuffs, puncture damage from rolling loads, tire chains or studs, snowmobile tracks, improperly castered carts, damage or discoloration from adhesive or floor care products, excessive moisture, alkaline, hydro-static pressure damage from the sub-floor, mold or mildew, installation over gypsum based patching and leveling compounds. No action for breach of this warranty may be commenced more than 60 Days after date of purchase. This warranty is not transferable. Customer must notify RPM of all manufacturer defects within 60 days of purchase. Proof of purchase date will be required.

Drymate® is a Registered Trademark of RPM, Inc.

©2019 Energizer Auto. Armor ALL® is a trademark of Energizer Auto and is used under license by RPM, Inc.